From Malware Analysis to Portable Clam AV
Tuesday, September 18, 2012
4
comments
Malware forensics can answer numerous questions. Is there malware on the system, where is it, how long has it been there, and how did it get there in the first place. Despite all the questions malware forensics can solve there are some that it can’t. What is the malware’s purpose, what is its functionality, and is it capable of stealing data. To answer these questions requires malware analysis. Practical Malware Analysis defines malware analysis as “the art of dissecting malware to understand how it works, how to identify it, and how to defeat or eliminate it”. I’ve been working on improving my malware analysis skills while at the same time thinking about the different ways organizations can benefit from the information gained by analyzing malware. One such benefit is empowering the help desk to combat malware. Everyday help desks are trying to find malware on computers using antivirus products lacking signatures to detect it. Analyzing malware can provide enough information to build a custom antivirus signature to provide the help desk with a capability to find it until the commercial antivirus signatures catch up. In this post I’m going through the process; from analyzing malware to creating a custom antivirus signature to using the signature in the portable apps ClamAV version.
The work presented in this post was originally put together for my hands on lab for a Tr3Secure meet-up. Also, the sample used was obtained from Contagio’s post APT Activity Monitor / Keylogger.
Disclaimer:
I’m not a malware analyst. I’m an information security and digital forensic practitioner who is working on improving my malware analysis skills. As such for anyone looking to be more knowledgeable on the subject then I highly recommend the books Practical Malware Analysis and the Malware Analyst's Cookbook.
Static Analysis is when the malware is examined without actually running it. There are different static analysis steps to extract information; the two I’m discussing are: reviewing strings and reviewing the import table.
Strings in malware can provide clues about the program and I find them helpful since it makes me more aware about malware’s potential functionality. However, conclusions cannot be drawn by solely looking at the strings. I usually first run HexDive on a sample to filter the strings typically associated with malware followed by running Strings to make sure I see everything.
Below is the Hexdrive command running against AdobeInfo.exe and a snippet from its output.
C:\> Hdive.exe C:\Samples\AdobeInfo.exe
CreateFileA
SetFileAttributesA
CreateDirectoryA
GetCurrentDirectoryA
GetWindowTextA
GetForegroundWindow
GetAsyncKeyState
GetStartupInfoA
[Up]
[Num Lock]
[Down]
[Right]
[UP]
[Left]
[PageDown]
[End]
[Del]
[PageUp]
[Home]
[Insert]
[Scroll Lock]
[Print Screen]
[WIN]
[CTRL]
[TAB]
[F12]
[F11]
There were numerous Windows API function names in the strings and looking the functions up in Practical Malware Analysis’s Appendix A (commonly encountered Windows functions) provides some clues. The following are three function names and why they may be relevant:
- CreateFileA: creates new or opens existing file
- GetForegroundWindow: returns a handle to a window currently in the foreground of the desktop. Function is commonly used by keyloggers to determine what window the user is entering keystrokes in
- GetAsyncKeyState: used to determine whether a particular key is being pressed. Function is sometimes used to implement a keylogger
The other interesting strings were the characters associated with a keyboard such as [Down] and [Del]. The combination of the API names and keyword characters indicate the malware could have some keylogging functionality.
Below is the Strings command running against AdobeInfo.exe and a snippet from its output.
C:\>Strings.exe C:\Samples\AdobeInfo.exe
---- %04d%02d%02d %02d:%02d:%02d ----------------
\UpdaterInfo.dat
\mssvr
The Active Windows Title: %s
In addition to the strings extracted with HexDrive, Strings revealed some other text that didn’t become clear until later in the examination.
“Imports are functions used by one program that are actually stored in a different program, such as code libraries that contain functionality common to many programs”. Looking at functions imported by a program provides better information about a malware’s functionality than solely relying on its strings. I used CFF Explorer to review the import table as shown in the screen shot below.
The import table showed three DLLs which were kernel32.dll, user32.dll, and msvcrt.dll. The DLLs’ functions imported matched the Windows API function names I found earlier in the strings. The functions provide the sample with the ability to: create and open files and directories, copies text from a window’s title bar, returns a handle to an active window, returns handle to a loaded module, and monitor for when a key is pressed. All of which strengthens the indication that the sample is in fact a keylogger.
The opposite of static analysis is dynamic analysis which is examining the malware as it runs on a system. There are different dynamic analysis steps and tools to use but I’m only going to discuss one; monitoring program execution with Capture-Bat. Below is the output from the Capture-Bat log after AdobeInfo.exe executed on the system (the entries related to my monitoring tools were removed).
"2/8/2012 15:03:27.653","process","created","C:\WINDOWS\explorer.exe","C:\Samples\AdobeInfo.exe"
"2/8/2012 15:03:40.403","file","Write","C:\Samples\AdobeInfo.exe","C:\Samples\mssvr\UpdaterInfo.dat"
"2/8/2012 15:03:40.481","file","Write","C:\Samples\AdobeInfo.exe","C:\Samples\mssvr\UpdaterInfo.dat"
"2/8/2012 15:03:40.497","file","Write","C:\Samples\AdobeInfo.exe","C:\Samples\mssvr\UpdaterInfo.dat"
"2/8/2012 15:04:33.419","file","Write","C:\Samples\AdobeInfo.exe","C:\Samples\mssvr\UpdaterInfo.dat"
"2/8/2012 15:04:33.419","file","Write","C:\Samples\AdobeInfo.exe","C:\Samples\mssvr\UpdaterInfo.dat"
Capture-Bat revealed when AdobeInfo.exe runs it creates a folder named mssvr in the same folder where the executable is located as well as creates a file named UpdaterInfo.dat inside the folder. Remember the suspicious strings before? Now the strings \UpdaterInfo.dat and \mssvr make a lot more sense. Looking at the UpdaterInfo.dat file closer showed it was a text file containing the captured data as can be seen in the partial output below.
---- 20120802 15:07:38 ----------------
15:07:40 The Active Windows Title: Process Explorer - Sysinternals: www.sysinternals.com [XP-SP2\Administrator]
15:07:33 The Active Windows Title: C:\WINDOWS\system32\cmd.exe
15:07:39 The Active Windows Title: Process Explorer - Sysinternals: www.sysinternals.com [XP-SP2\Administrator]
c[CTRL]y
15:07:41 The Active Windows Title: Process Monitor - Sysinternals: www.sysinternals.com
15:07:44 The Active Windows Title: Process Monitor
15:07:38 The Active Windows Title: Process Monitor
15:07:38 The Active Windows Title: API Monitor v2 (Alpha-r12) 32-bit (Administrator)
15:07:44 The Active Windows Title: Process Monitor
15:07:45 The Active Windows Title: API Monitor v2 (Alpha-r12) 32-bit (Administrator)
15:07:35 The Active Windows Title: ApateDNS
Everything in the analysis so far has identified the AdobeInfo.exe program as a keylogger that stores its captured data in a log file named UpdaterInfo.dat. All that was left was to confirm the functionality. I used Windows to create a password protected zip file then I unzipped it. A quick look at the UpdaterInfo.dat log file afterwards confirmed the functionality (note: Windows made me enter the password twice).
16:07:30 The Active Windows Title: Program Manager
16:07:38 The Active Windows Title: Add to Archive
[CTRL]
16:07:58 The Active Windows Title: Program Manager
supersecretsupersecret
16:07:58 The Active Windows Title: Compressing
16:07:59 The Active Windows Title: Program Manager
16:07:21 The Active Windows Title: Extraction Wizard
16:07:30 The Active Windows Title: Password needed
16:07:37 The Active Windows Title: Extraction Wizard
supersecret
16:07:40 The Active Windows Title: Program Manager
16:07:42 The Active Windows Title: Windows Explorer
I’m not going into detail about how to create custom signatures for ClamAV but I will point to the great references I found on the subject. The Malware Analyst’s Cookbook talks about how to leverage ClamAV for malware analysis in the recipes: Recipe 3-1 (examining existing ClamAV signatures), Recipe 3-2 (creating a custom ClamAV database), and Recipe 3-3 (converting ClamAV signatures to Yara). Another resource is Alexander Hanel’s post An Intro to Creating Anti-Virus Signatures. The ClamAV website also has information on the subject as well including the slide deck in PDF format for the webcast Writing CalmAV Signatures.
I spent some time creating different signatures: from a custom hash database to extended signature format to a logical signature. To keep the post shorter I’m only going to cover how I created a logical signature. A ClamAV logical signature is based on hex strings found inside a file and logical operators can be used to combine the hex strings in different ways. The format for the signature is below:
SignatureName;TargetDescriptionBlock;LogicalExpression;Sig0;Sig1;Sig2;
The SignatureName is self explanatory, the TargetDescriptionBlock is the type of file the signature applies to (0 means any file), LogicalExpression is how the signatures are combined using logical operators, and the Sig# are the actual hex strings. The completed signature is placed into a file with an ldb extension.
Reviewing the strings in AdobeInfo.exe provided some good candidates to create a signature for; specially \UpdaterInfo.dat, \mssvr, and [CTRL]. I used portable apps ClamAV’s sigtool to determine the hex of those strings. I ran the following command for each string:
C:\>echo \UpdaterInfo.dat | App\clamwin\bin\sigtool --hex-dump
The end result provided me with the hex for each string.
\UpdaterInfo.dat
5c55706461746572496e666f2e646174
\mssvr
5c6d73737672
[CTRL]
5b4354524c5d
I then combined the strings into a logical signature as shown next.
AdobeInfo.exe;Target:0;0&1&2;5c55706461746572496e666f2e646174;5c6d73737672;5b4354524c5d
Finally, I ran the custom signature against the AdobeInfo.exe file and was successfully able to identify it. The command to run a custom scan from the command-line in portable ClamAV is:
App\clamwin\bin\clamscan -d adobe.ldb C:\Samples\
I’m done right? I was able to analyzing the malware to determine its functionality, create a custom antivirus signature to detect it, and found a way to run the custom signature using the portable apps ClamAv version. I wouldn’t be too quick to say my job is done though. Let’s be honest, going to any help desk and telling the staff from now on you have to use the command-line may not have the greatest chances of success. You need to provide options; one option most help desk staff will want is an antivirus program with a GUI that’s similar to their commercial antivirus programs. ClamAV has a pretty nice graphical user interface that can be configured to use custom signatures so we could leverage it.
The article How to create custom signatures for Immunet 3.0, powered by ClamAV explains how to write custom signatures and configure the Windows ClamAV version (Immunet) to use them. This is nice but Immunet has to be installed on a computer. A cool option would be to be able to run scans from a removable drive so when the help desk respond to a system all they need to do is to plug in their thumb drive. This is where the portable apps ClamAV version comes into play since it can run scans from a thumb drive. I couldn’t find any documentation about how to use custom signatures in the portable version but after a little testing I figured it out. All that has to be done is to copy the custom signature to the same folder where ClamAV stores it signature files main.cvd and daily.cdv. This location is ClamWinPortable\Data\db folder. I copied my adobe.ldb custom signature to the Data\db folder and was able to locate the malware sample I disguised as Notepad ++.
The work presented in this post was originally put together for my hands on lab for a Tr3Secure meet-up. Also, the sample used was obtained from Contagio’s post APT Activity Monitor / Keylogger.
Disclaimer:
I’m not a malware analyst. I’m an information security and digital forensic practitioner who is working on improving my malware analysis skills. As such for anyone looking to be more knowledgeable on the subject then I highly recommend the books Practical Malware Analysis and the Malware Analyst's Cookbook.
Static Analysis
Static Analysis is when the malware is examined without actually running it. There are different static analysis steps to extract information; the two I’m discussing are: reviewing strings and reviewing the import table.
Reviewing Strings
Strings in malware can provide clues about the program and I find them helpful since it makes me more aware about malware’s potential functionality. However, conclusions cannot be drawn by solely looking at the strings. I usually first run HexDive on a sample to filter the strings typically associated with malware followed by running Strings to make sure I see everything.
Below is the Hexdrive command running against AdobeInfo.exe and a snippet from its output.
C:\> Hdive.exe C:\Samples\AdobeInfo.exe
CreateFileA
SetFileAttributesA
CreateDirectoryA
GetCurrentDirectoryA
GetWindowTextA
GetForegroundWindow
GetAsyncKeyState
GetStartupInfoA
[Up]
[Num Lock]
[Down]
[Right]
[UP]
[Left]
[PageDown]
[End]
[Del]
[PageUp]
[Home]
[Insert]
[Scroll Lock]
[Print Screen]
[WIN]
[CTRL]
[TAB]
[F12]
[F11]
There were numerous Windows API function names in the strings and looking the functions up in Practical Malware Analysis’s Appendix A (commonly encountered Windows functions) provides some clues. The following are three function names and why they may be relevant:
- CreateFileA: creates new or opens existing file
- GetForegroundWindow: returns a handle to a window currently in the foreground of the desktop. Function is commonly used by keyloggers to determine what window the user is entering keystrokes in
- GetAsyncKeyState: used to determine whether a particular key is being pressed. Function is sometimes used to implement a keylogger
The other interesting strings were the characters associated with a keyboard such as [Down] and [Del]. The combination of the API names and keyword characters indicate the malware could have some keylogging functionality.
Below is the Strings command running against AdobeInfo.exe and a snippet from its output.
C:\>Strings.exe C:\Samples\AdobeInfo.exe
---- %04d%02d%02d %02d:%02d:%02d ----------------
\UpdaterInfo.dat
\mssvr
The Active Windows Title: %s
In addition to the strings extracted with HexDrive, Strings revealed some other text that didn’t become clear until later in the examination.
Reviewing the Import Table
“Imports are functions used by one program that are actually stored in a different program, such as code libraries that contain functionality common to many programs”. Looking at functions imported by a program provides better information about a malware’s functionality than solely relying on its strings. I used CFF Explorer to review the import table as shown in the screen shot below.
The import table showed three DLLs which were kernel32.dll, user32.dll, and msvcrt.dll. The DLLs’ functions imported matched the Windows API function names I found earlier in the strings. The functions provide the sample with the ability to: create and open files and directories, copies text from a window’s title bar, returns a handle to an active window, returns handle to a loaded module, and monitor for when a key is pressed. All of which strengthens the indication that the sample is in fact a keylogger.
Dynamic Analysis
The opposite of static analysis is dynamic analysis which is examining the malware as it runs on a system. There are different dynamic analysis steps and tools to use but I’m only going to discuss one; monitoring program execution with Capture-Bat. Below is the output from the Capture-Bat log after AdobeInfo.exe executed on the system (the entries related to my monitoring tools were removed).
"2/8/2012 15:03:27.653","process","created","C:\WINDOWS\explorer.exe","C:\Samples\AdobeInfo.exe"
"2/8/2012 15:03:40.403","file","Write","C:\Samples\AdobeInfo.exe","C:\Samples\mssvr\UpdaterInfo.dat"
"2/8/2012 15:03:40.481","file","Write","C:\Samples\AdobeInfo.exe","C:\Samples\mssvr\UpdaterInfo.dat"
"2/8/2012 15:03:40.497","file","Write","C:\Samples\AdobeInfo.exe","C:\Samples\mssvr\UpdaterInfo.dat"
"2/8/2012 15:04:33.419","file","Write","C:\Samples\AdobeInfo.exe","C:\Samples\mssvr\UpdaterInfo.dat"
"2/8/2012 15:04:33.419","file","Write","C:\Samples\AdobeInfo.exe","C:\Samples\mssvr\UpdaterInfo.dat"
Capture-Bat revealed when AdobeInfo.exe runs it creates a folder named mssvr in the same folder where the executable is located as well as creates a file named UpdaterInfo.dat inside the folder. Remember the suspicious strings before? Now the strings \UpdaterInfo.dat and \mssvr make a lot more sense. Looking at the UpdaterInfo.dat file closer showed it was a text file containing the captured data as can be seen in the partial output below.
---- 20120802 15:07:38 ----------------
15:07:40 The Active Windows Title: Process Explorer - Sysinternals: www.sysinternals.com [XP-SP2\Administrator]
15:07:33 The Active Windows Title: C:\WINDOWS\system32\cmd.exe
15:07:39 The Active Windows Title: Process Explorer - Sysinternals: www.sysinternals.com [XP-SP2\Administrator]
c[CTRL]y
15:07:41 The Active Windows Title: Process Monitor - Sysinternals: www.sysinternals.com
15:07:44 The Active Windows Title: Process Monitor
15:07:38 The Active Windows Title: Process Monitor
15:07:38 The Active Windows Title: API Monitor v2 (Alpha-r12) 32-bit (Administrator)
15:07:44 The Active Windows Title: Process Monitor
15:07:45 The Active Windows Title: API Monitor v2 (Alpha-r12) 32-bit (Administrator)
15:07:35 The Active Windows Title: ApateDNS
Everything in the analysis so far has identified the AdobeInfo.exe program as a keylogger that stores its captured data in a log file named UpdaterInfo.dat. All that was left was to confirm the functionality. I used Windows to create a password protected zip file then I unzipped it. A quick look at the UpdaterInfo.dat log file afterwards confirmed the functionality (note: Windows made me enter the password twice).
16:07:30 The Active Windows Title: Program Manager
16:07:38 The Active Windows Title: Add to Archive
[CTRL]
16:07:58 The Active Windows Title: Program Manager
supersecretsupersecret
16:07:58 The Active Windows Title: Compressing
16:07:59 The Active Windows Title: Program Manager
16:07:21 The Active Windows Title: Extraction Wizard
16:07:30 The Active Windows Title: Password needed
16:07:37 The Active Windows Title: Extraction Wizard
supersecret
16:07:40 The Active Windows Title: Program Manager
16:07:42 The Active Windows Title: Windows Explorer
Creating Custom AntiVirus Signature
I’m not going into detail about how to create custom signatures for ClamAV but I will point to the great references I found on the subject. The Malware Analyst’s Cookbook talks about how to leverage ClamAV for malware analysis in the recipes: Recipe 3-1 (examining existing ClamAV signatures), Recipe 3-2 (creating a custom ClamAV database), and Recipe 3-3 (converting ClamAV signatures to Yara). Another resource is Alexander Hanel’s post An Intro to Creating Anti-Virus Signatures. The ClamAV website also has information on the subject as well including the slide deck in PDF format for the webcast Writing CalmAV Signatures.
I spent some time creating different signatures: from a custom hash database to extended signature format to a logical signature. To keep the post shorter I’m only going to cover how I created a logical signature. A ClamAV logical signature is based on hex strings found inside a file and logical operators can be used to combine the hex strings in different ways. The format for the signature is below:
SignatureName;TargetDescriptionBlock;LogicalExpression;Sig0;Sig1;Sig2;
The SignatureName is self explanatory, the TargetDescriptionBlock is the type of file the signature applies to (0 means any file), LogicalExpression is how the signatures are combined using logical operators, and the Sig# are the actual hex strings. The completed signature is placed into a file with an ldb extension.
Reviewing the strings in AdobeInfo.exe provided some good candidates to create a signature for; specially \UpdaterInfo.dat, \mssvr, and [CTRL]. I used portable apps ClamAV’s sigtool to determine the hex of those strings. I ran the following command for each string:
C:\>echo \UpdaterInfo.dat | App\clamwin\bin\sigtool --hex-dump
The end result provided me with the hex for each string.
\UpdaterInfo.dat
5c55706461746572496e666f2e646174
\mssvr
5c6d73737672
[CTRL]
5b4354524c5d
I then combined the strings into a logical signature as shown next.
AdobeInfo.exe;Target:0;0&1&2;5c55706461746572496e666f2e646174;5c6d73737672;5b4354524c5d
Finally, I ran the custom signature against the AdobeInfo.exe file and was successfully able to identify it. The command to run a custom scan from the command-line in portable ClamAV is:
App\clamwin\bin\clamscan -d adobe.ldb C:\Samples\
Empowering the Help Desk
I’m done right? I was able to analyzing the malware to determine its functionality, create a custom antivirus signature to detect it, and found a way to run the custom signature using the portable apps ClamAv version. I wouldn’t be too quick to say my job is done though. Let’s be honest, going to any help desk and telling the staff from now on you have to use the command-line may not have the greatest chances of success. You need to provide options; one option most help desk staff will want is an antivirus program with a GUI that’s similar to their commercial antivirus programs. ClamAV has a pretty nice graphical user interface that can be configured to use custom signatures so we could leverage it.
The article How to create custom signatures for Immunet 3.0, powered by ClamAV explains how to write custom signatures and configure the Windows ClamAV version (Immunet) to use them. This is nice but Immunet has to be installed on a computer. A cool option would be to be able to run scans from a removable drive so when the help desk respond to a system all they need to do is to plug in their thumb drive. This is where the portable apps ClamAV version comes into play since it can run scans from a thumb drive. I couldn’t find any documentation about how to use custom signatures in the portable version but after a little testing I figured it out. All that has to be done is to copy the custom signature to the same folder where ClamAV stores it signature files main.cvd and daily.cdv. This location is ClamWinPortable\Data\db folder. I copied my adobe.ldb custom signature to the Data\db folder and was able to locate the malware sample I disguised as Notepad ++.
Labels:
antivirus,
malware,
malware analysis
Posts
